Montaż alarmu RTX Tornado CS3

woytec

Hello.
To mój pierwszy post.
Przedstawiam się grzecznie: Wojtek, Olsztyn Szczęśliwy

Potrzebuję pomocy w zakresie montażu alarmu RTX Tornado CS3.

Generalnie typ alarmu nie gra roli ale potrzebuję informacji o umiejscowieniu przewodów i ich oznaczenia (kolorystyka, itp) jak najbliżej skrzynki bezpieczników pod kierownicą:
- kierunkowskaz lewy,
- kierunkowskaz prawy,
- sygnał komfort -200mA do domykania drzwi (pewnie w okolicach nadkola)

Pozostałe ogarnięte.
Swoją drogą do Audi A2 znalezienie service manuala za free (skan, pdf) w normalnym języku (english) jest niemożliwe ... chyba, że jestem w błędzie.
Znalazłem po rosyjsku ... ale cyrylica to już dla mnie zapomniany język Szczęśliwy

woytec

Trochę dziwnie, że sam sobie odpowiadam ... ale ok ...
Poniżej opis dla tych, którzy chcą zamontować system alarmowy:

ALARM/SIREN POSITION
Position the compact alarms and the sirens under the motor cooling bowl located on the left of the engine compartment.

CENTRAL UNIT POSITION
The modular systems and the modules should be positioned under the moquette, on front of the driver’s side seat.

POWER SUPPLY
+ 30: connect with a 6 mm2 eyelet cable terminal to the original pin of the positive shunting located under the moquette, on front of the driver’s side seat.
- 31: Connect with a 8 mm2 eyelet cable terminal to the original ground pin located on the base of the driver’s side member, behind the left lateral panel.

IGNITION WIRE
+ 15/54: Connect to the 2,5 mm2 BLACK/BLUE wire located in the wiring harness coming out of the ignition key.

DIRECTION INDICATORS
Connect to the BLACK/WHITE and BLACK/GREEN wires located in the wiring harness behind the driver’s side sill cover.

ELECTRIC WINDOWS
Positive control signal, Comfort closing. The closing of the electric windows is obtained timing the GREY/GREEN wire located at the position nr. 8, placed in the 12 way black connector coming out of the central incorporated to the driver’s side front window motor.

ACTIVAT./DEACTIVATION CONTROLS
Connections antitheft/vehicle
Art.38XX Vehicle Position
GREY/BLACK GREY/BLUE position nr. 5
YELLOW/BLACK BROWN/BLUE position nr. 4
VIOLET/WHITE ground car body
ORANGE ground car body
VIOLET GREEN/BLACK position nr. 11
ORANGE/WHITE ground car body
Note: The BROWN/ BLUE and GREY/BLUE wires at the positions nr.4 and nr. 5 are located in the 12 way black connector, directly on the coming out of the central incorporated to the electric windows motor, inside the driver’s side door.

IMMOBILISATION POINT
Fuel pump
Cut the 1,5 mm2 GREEN/YELLOW wire located at the position nr. 15 of the 17 way black connector, in the relays group placed under the moquette, on front of the driver’s side seat.

STARTER
+50: Cut the 2,5 mm2 RED/GREEN wire located in the wiring harness coming out of the ignition key.

BONNET SWITCH
Connect to the 0,5 mm2 YELLOW/RED at the position nr. 15 of the 17 way red connector located behind the left lateral side, driver’s side

DOORS SWITCH
Connect to the 0,75 mm2 BROWN/WHITE wire, at the position nr. 2, of the 12 way black connector of the radio central unit located under the moquette, on front of the driver’s side seat.

BOOT SWITCH
Connect to the 1 mm2 BROWN/VIOLET wire, at the position nr. 11, of the 16 way light brownconnector, of the radio central unit located under the moquette, on front of the driver’s side seat.

Audi A2

Tu masz schematy instalacji

[link widoczny dla zalogowanych]